A
DDRESS
T
ABLE
C
OMMANDS
4-165
show mac-address-table
This command shows classes of entries in the bridge-forwarding database.
Syntax
show mac-address-table
[
address
mac-address
[
mask
]]
[
interface
interface
] [
vlan
vlan-id
]
[
sort
{
address
|
vlan
|
interface
}]
•
mac-address
- MAC address.
•
mask
- Bits to match in the address.
•
interface
-
ethernet
unit
/
port
-
unit
- Stack unit. (Range: 1-8)
-
port
- Port number. (Range: 1-24/48)
-
port-channel
channel-id
(Range: 1-32)
•
vlan-id
- VLAN ID (Range: 1-4093)
•
sort
- Sort by address, vlan or interface.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• The MAC Address Table contains the MAC addresses associated with
each interface. Note that the Type field may include the following
types:
- Learned - Dynamic address entries
- Permanent - Static entry
- Delete-on-reset - Static entry to be deleted when system is reset
• The mask should be hexadecimal numbers (representing an equivalent
bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified
MAC address. Enter hexadecimal numbers, where an equivalent
binary bit “0” means to match a bit and “1” means to ignore a bit. For
example, a mask of 00-00-00-00-00-00 means an exact match, and a
mask of FF-FF-FF-FF-FF-FF means “any.”
• The maximum number of address entries is 8191.
Summary of Contents for TigerSwitch 1000
