SMC Networks TigerSwitch 1000, Management Manual

Page: 189 / 480

VLAN C
ONFIGURATION
3-141
Figure 3-63. Assigning VLAN Port and Trunk Groups
CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes
Port 3 from VLAN 2.
Configuring VLAN Behavior for Interfaces
You can configure VLAN behavior for specific interfaces, including the
default VLAN identifier (PVID), accepted frame types, ingress filtering,
GVRP status, and GARP timers.
Command Usage
• GVRP – GARP VLAN Registration Protocol defines a way for
switches to exchange VLAN information in order to automatically
register VLAN members on interfaces across the network.
• GARP – Group Address Registration Protocol is used by GVRP to
register or deregister client attributes for client services within a
bridged LAN. The default values for the GARP timers are
independent of the media access method or data rate. These values
should not be changed unless you are experiencing difficulties with
GVRP registration/deregistration.
Console(config)#interface ethernet 1/3 4-132
Console(config-if)#switchport allowed vlan add 1 tagged 4-191
Console(config-if)#switchport allowed vlan remove 2