![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422066.webp)
C
ONFIGURING
THE
S
WITCH
3-18
•
Gateway IP Address
– IP address of the gateway router between this
device and management stations that exist on other network segments.
(Default: 0.0.0.0)
•
MAC Address
– The physical layer address for this switch.
•
Restart DHCP
– Requests a new IP address from the DHCP server.
Manual Configuration
Web
– Click System, IP Configuration. Select the VLAN through which
the management station is attached, set the IP Address Mode to “Static,”
enter the IP address, subnet mask and gateway, then click Apply.
Figure 3-6. Manual IP Configuration
CLI
– Specify the management interface, IP address and default gateway.
Console#config
Console(config)#interface vlan 1
4-132
Console(config-if)#ip address 10.1.0.254 255.255.255.0
4-231
Console(config-if)#exit
Console(config)#ip default-gateway 192.168.1.254
4-233
Console(config)#
Summary of Contents for TigerSwitch 1000
