![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422301.webp)
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-79
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-11.
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: SMC8748L2
System OID string: 1.3.6.1.4.1.202.20.42
System information
System Up time: 0 days, 2 hours, 3 minutes, and 47.49 seconds
System Name: R & D 5
System Location: WC 9
System Contact: Geoff
MAC address (unit1): 00-30-F1-DF-9C-A0
Web server: enable
Web server port: 80
Web secure server: enable
Web secure server port: 443
Telnet server: enable
Telnet server port: 23
Jumbo Frame: Disabled
POST result
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Crossbar Int Loopback Test ... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#
Summary of Contents for TigerSwitch 1000
