![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422397.webp)
S
PANNING
T
REE
C
OMMANDS
4-175
spanning-tree spanning-disabled
This command disables the spanning tree algorithm for the specified
interface. Use the
no
form to reenable the spanning tree algorithm for the
specified interface.
Syntax
[
no
]
spanning-tree spanning-disabled
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
This example disables the spanning tree algorithm for port 5.
spanning-tree cost
This command configures the spanning tree path cost for the specified
interface. Use the
no
form to restore the default.
Syntax
spanning-tree
cost
cost
no spanning-tree
cost
cost
cost
- The path cost for the port. (Range: 1-200,000,000))
The recommended range is:
- Ethernet: 200,000-20,000,000
- Fast Ethernet: 20,000-2,000,000
- Gigabit Ethernet: 2,000-200,000
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#
Summary of Contents for TigerSwitch 1000
