![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422195.webp)
VLAN C
ONFIGURATION
3-147
Figure 3-65. Private VLAN Information
CLI
– This example shows the switch configured with primary VLAN 5
and secondary VLAN 6. Port 3 has been configured as a promiscuous port
and mapped to VLAN 5, while ports 4 and 5 have been configured as a
host ports and are associated with VLAN 6. This means that traffic for
port 4 and 5 can only pass through port 3.
Configuring Private VLANs
The Private VLAN Configuration page is used to create/remove primary,
community, or isolated VLANs.
Command Attributes
•
VLAN ID
– ID of configured VLAN (1-4094).
•
Type
– There are three types of private VLANs:
Console#show vlan private-vlan
4-153
Primary Secondary Type Interfaces
-------- ----------- ----------
--------------------------------------
5 primary Eth1/ 3
5 6 community Eth1/ 4 Eth1/ 5
Summary of Contents for TigerSwitch 1000
