![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422094.webp)
C
ONFIGURING
THE
S
WITCH
3-46
•
RADIUS Settings
-
Global
– Provides globally applicable RADIUS settings.
-
ServerIndex
– Specifies one of five RADIUS servers that may be
configured. The switch attempts authentication using the listed
sequence of servers. The process ends when a server either approves
or denies access to a user.
-
Server Port Number
– Network (UDP) port of authentication
server used for authentication messages.
(Range: 1-65535; Default: 1812)
-
Secret Text String
– Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string.
(Maximum length: 20 characters)
-
Number of Server Transmits
– Number of times the switch tries
to authenticate logon access via the authentication server. (Range:
1-30; Default: 2)
-
Timeout for a reply
– The number of seconds the switch waits for
a reply from the RADIUS server before it resends the request.
(Range: 1-65535; Default: 5)
•
TACACS Settings
-
Server IP Address
– Address of the server.
(Default: 10.11.12.13)
-
Server Port Number
– Network (TCP) port of server
used for authentication messages.
(Range: 1-65535; Default: 49)
-
Secret Text String
– Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string.
(Maximum length: 20 characters)
Note:
The local switch user database has to be set up by manually
entering user names and passwords using the CLI.
(See “username” on page 4-34.)
Summary of Contents for TigerSwitch 1000
