![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422192.webp)
C
ONFIGURING
THE
S
WITCH
3-144
Web
– Click VLAN, 802.1Q VLAN, Port Configuration or VLAN Trunk
Configuration. Fill in the required settings for each interface, click Apply.
Figure 3-64. Configuring VLAN Ports
CLI
– This example sets port 3 to accept only tagged frames, assigns
PVID 3 as the native VLAN ID, enables GVRP, sets the GARP timers,
and then sets the switchport mode to hybrid.
Console(config)#interface ethernet 1/3
4-132
Console(config-if)#switchport acceptable-frame-types tagged
4-188
Console(config-if)#switchport ingress-filtering
4-189
Console(config-if)#switchport native vlan 3
4-190
Console(config-if)#switchport gvrp
4-205
Console(config-if)#garp timer join 20
4-206
Console(config-if)#garp timer leave 90
Console(config-if)#garp timer leaveall 2000
Console(config-if)#switchport mode hybrid
4-187
Console(config-if)#
Summary of Contents for TigerSwitch 1000
