![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422256.webp)
C
OMMAND
L
INE
I
NTERFACE
4-34
username
This command adds named users, requires authentication at login,
specifies or changes a user's password (or specify that no password is
required), or specifies or changes a user's access level. Use the
no
form to
remove a user name.
Syntax
username
name
{
access-level
level
|
no password
|
password
{
0
|
7
}
password
}
no username
name
•
name
- The name of the user.
(Maximum length: 8 characters, case sensitive. Maximum users: 16)
•
access-level
level
- Specifies the user level.
The device has two predefined privilege levels:
0
: Normal Exec,
15
: Privileged Exec.
•
nopassword
- No password is required for this user to log in.
• {
0
|
7
} - 0 means plain password, 7 means encrypted password.
•
password
password
- The authentication password for the user.
(Maximum length: 8 characters plain text, 32 encrypted, case
sensitive)
Default Setting
• The default access level is Normal Exec.
• The factory defaults for the user names and passwords are:
Command Mode
Global Configuration
Command Usage
Table 4-10 Default Login Settings
username
access-level
password
guest
admin
0
15
guest
admin
Summary of Contents for TigerSwitch 1000
