![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422112.webp)
C
ONFIGURING
THE
S
WITCH
3-64
•
Max-Req
– Sets the maximum number of times the switch port will
retransmit an EAP request packet to the client before it times out the
authentication session. (Range: 1-10; Default 2)
•
Quiet Period
– Sets the time that a switch port waits after the Max
Request Count has been exceeded before attempting to acquire a new
client. (Range: 1-65535 seconds; Default: 60 seconds)
•
Re-authen Period
– Sets the time period after which a connected
client must be re-authenticated. (Range: 1-65535 seconds; Default:
3600 seconds)
•
Tx Period
– Sets the time period during an authentication session that
the switch waits before re-transmitting an EAP packet. (Range:
1-65535; Default: 30 seconds)
•
Authorized
–
-
Yes
– Connected client is authorized.
-
No
– Connected client is not authorized.
-
Blank
– Displays nothing when dot1x is disabled on a port.
•
Supplicant
– Indicates the MAC address of a connected client.
•
Trunk
– Indicates if the port is configured as a trunk port.
Web
– Click Security, 802.1x, Port Configuration. Modify the parameters
required, and click Apply.
Figure 3-31. 802.1x Port Configuration
CLI
– This example sets the 802.1X parameters on port 2. For a
description of the additional fields displayed in this example, see “show
dot1x” on page 4-109.
Summary of Contents for TigerSwitch 1000
