![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422059.webp)
B
ASIC
C
ONFIGURATION
3-11
Basic Configuration
Displaying System Information
You can easily identify the system by displaying the device name, location
and contact information.
Field Attributes
•
System Name
– Name assigned to the switch system.
•
Object ID
– MIB II object ID for switch’s network management
subsystem.
•
Location
– Specifies the system location.
•
Contact
– Administrator responsible for the system.
•
System Up Time
– Length of time the management agent has been
up.
These additional parameters are displayed for the CLI.
•
MAC Address
– The physical layer address for this switch.
•
Web server
– Shows if management access via HTTP is enabled.
•
Web server port
– Shows the TCP port number used by the web
interface.
•
Web secure server
– Shows if management access via HTTPS is
enabled.
•
Web secure server port
– Shows the TCP port used by the HTTPS
interface.
•
Telnet server
– Shows if management access via Telnet is enabled.
•
Telnet port
– Shows the TCP port used by the Telnet interface.
•
Jumbo Frame
– Shows if jumbo frames are enabled.
•
POST result
– Shows results of the power-on self-test
Summary of Contents for TigerSwitch 1000
