![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422125.webp)
P
ORT
C
ONFIGURATION
3-77
•
Speed Duplex Status
– Shows the current speed and duplex mode.
(Auto, or fixed choice)
•
Flow Control Status
– Indicates the type of flow control currently in
use. (IEEE 802.3x, Back-Pressure or None)
•
Autonegotiation
– Shows if auto-negotiation is enabled or disabled.
•
Trunk Member
1
– Shows if port is a trunk member.
•
Creation
2
– Shows if a trunk is manually configured or dynamically set
via LACP.
1: Port Information only.
2: Trunk Information only
Web
– Click Port, Port Information or Trunk Information.
Figure 3-38. Port Status Information
Field Attributes (CLI)
Basic information:
•
Port type
– Indicates the port type.
(1000BASE-T, 1000BASE-SX, 1000BASE-LX or 100BASE-FX)
•
MAC address
– The physical layer address for this port. (To access
this item on the web, see “Setting the Switch’s IP Address” on
page 3-17.)
Summary of Contents for TigerSwitch 1000
