SMC Networks TigerSwitch 1000, Management Manual

Page: 88 / 480

C
ONFIGURING THE
S
WITCH
3-40
• Access Mode
- Read-Only – Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
- Read/Write – Specifies read-write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Web – Click SNMP, Configuration. Add new community strings as
required, select the access rights from the Access Mode drop-down list,
then click Add.
Figure 3-21. Configuring SNMP Community Strings
CLI – The following example adds the string “spiderman” with read/write
access.
Specifying Trap Managers and Trap Types
Traps indicating status changes are issued by the switch to specified trap
managers. You must specify trap managers so that key events are reported
by this switch to your management station (using network management
platforms such as SMC EliteView or HP OpenView). You can specify up
to five management stations that will receive authentication failure
messages and other trap messages from the switch.
Console(config)#snmp-server community spiderman rw 4-125
Console(config)#