![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422294.webp)
C
OMMAND
L
INE
I
NTERFACE
4-72
Related Commands
Related Commands (4-70)
show sntp
This command displays the current time and configuration settings for the
SNTP client, and indicates whether or not the local time has been properly
updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for
sending time synchronization requests, and the current SNTP mode
(i.e., unicast).
Example
clock timezone
This command sets the time zone for the switch’s internal clock.
Syntax
clock timezone
name
hour
hours
minute
minutes
{
before-utc
|
after-utc
}
•
name
- Name of timezone, usually an acronym.
(Range: 1-29 characters)
•
hours
- Number of hours before/after UTC. (Range: 1-13 hours)
•
minutes
- Number of minutes before/after UTC.
(Range: 0-59 minutes)
•
before-utc
- Sets the local time zone before (east) of UTC.
•
after-utc
- Sets the local time zone after (west) of UTC.
Console#show sntp
Current time: Dec 23 05:13:28 2002
Poll interval: 16
Current mode: unicast
SNTP status : Enabled
SNTP server 137.92.140.80 0.0.0.0 0.0.0.0
Current server: 137.92.140.80
Console#
Summary of Contents for TigerSwitch 1000
