![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422426.webp)
C
OMMAND
L
INE
I
NTERFACE
4-204
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the
no
form to
disable it.
Syntax
[
no
]
bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in
order to register VLAN members on ports across the network. This
function should be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
Example
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
show gvrp configuration
Displays GVRP configuration for
the selected interface
NE,
PE
4-206
garp timer
Sets the GARP timer for the
selected function
IC
4-206
show garp timer
Shows the GARP timer for the
selected function
NE,
PE
4-208
Console(config)#bridge-ext gvrp
Console(config)#
Table 4-54 GVRP and Bridge Extension Commands
Command
Function
Mode Page
Summary of Contents for TigerSwitch 1000
