![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422440.webp)
C
OMMAND
L
INE
I
NTERFACE
4-218
Command Usage
• The precedence for priority mapping is IP DSCP, and default
switchport priority.
• DSCP priority values are mapped to default Class of Service values
according to recommendations in the IEEE 802.1p standard, and
then subsequently mapped to the eight hardware priority queues.
• This command sets the IP DSCP priority for all interfaces.
Example
The following example shows how to map IP DSCP value 1 to CoS
value 0.
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp
[
interface
]
interface
•
ethernet
unit
/
port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-24/48)
•
port-channel
channel-id
(Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#
Summary of Contents for TigerSwitch 1000
