![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422406.webp)
C
OMMAND
L
INE
I
NTERFACE
4-184
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the
show vlan
command.
• Use the
interface vlan
command mode to define the port
membership mode and add or remove ports from a VLAN. The
results of these commands are written to the running-configuration
file, and you can display this file by entering the
show
running-config
command.
Example
Related Commands
show vlan (4 -193)
vlan
This command configures a VLAN. Use the
no
form to restore the default
settings or delete a VLAN.
Syntax
vlan
vlan-id
[
name
vlan-name
]
media ethernet
[
state
{
active
|
suspend
}]
no vlan
vlan-id
[
name
|
state
]
•
vlan-id
- ID of configured VLAN. (Range: 1-4094, no leading
zeroes)
•
name
- Keyword to be followed by the VLAN name.
-
vlan-name
- ASCII string from 1 to 32 characters.
•
media ethernet
- Ethernet media type.
•
state
- Keyword to be followed by the VLAN state.
-
active
- VLAN is operational.
-
suspend
- VLAN is suspended. Suspended VLANs do not pass
packets.
Console(config)#vlan database
Console(config-vlan)#
Summary of Contents for TigerSwitch 1000
