background image

 

Quick Start Guide

 

Wireless LAN Outdoor Bridge Solution

 

3CRWEASY96A 

Outdoor solution for secure long-distance 
wireless connections

 

The 3Com® Wireless LAN Outdoor Bridge Solution is a comprehensive building-to-building outdoor 
wireless LAN kit that reduces the need to evaluate, purchase and assemble separate components. One 
convenient package includes everything you need to offer an easy-to-manage building-to-building 
wireless LAN. The package features a 3Com Wireless LAN Building-to-Building Bridge with integrated 
antenna and power-over-Ethernet cable in a durable, weatherproof enclosure.

The bridge uses either of two network topologies:

 

 

Point-to-point

 

 

Point-to-multipoint

The first illustration shows the point-to-point topology (also known as Ad Hoc Network Mode).

 

 

 

Notice 

that the bridges face one another. While this is elementary in a close setting, real-world conditions such 
as long distances, mountainous regions, and architectural barriers will not allow for such a precise 
alignment. However, those conditions will not necessarily prohibit effective communication 
between locations.

 

309-2273-001AA.fm  Page 1  Monday, February 3, 2003  4:54 PM

Summary of Contents for 3CRWEASY96A









Reviews: