background image

Overview 

 

 

The NetComm 3G25W-R integrates a Wireless LAN and 3G WAN into 
one unit. Connection to the Internet is achieved through either a 3G 
service or via a fixed line xDSL/Cable/Satellite connection to the 
3G25W-R’s WAN port, providing you with the flexibility to choose how 
you access the Internet. The 3G25W-R’s automatic failover ensures 
you are always connected by activating the 3G connection should the 
xDSL/Cable/Satellite connection drop out. 

Users are able to share a single 3G connection via both a wired and 
wireless connection to the 3G25W-R. With a built in 802.11n wireless 
access point, this router provides wireless speeds of up to 150Mbps, 
150% faster than 11g technology¹. On top of this, the 3G25W-R has 
four LAN ports for wired connections to multiple devices. Rather than 
being restricted to certain USB modems, the 3G25W-R allows the 
user to simply insert an active SIM and utilise 3G Mobile Broadband 
for internet connectivity. 

The 3G25W-R includes advanced security features such as VPN 
pass-through, a full complement of wireless security options and a 
built in firewall. 

1 Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 
802.11n Draft 2.0 specifications. Actual wireless speed and coverage are dependent on network and 
environmental conditions included but not limited to volume of network traffic, building materials and 
construction/layout. 

Summary of Contents for 3G25W-R






































































Reviews: