SignaMax 065-7434, Configuration Manual

Page: 617 / 669

249 SIGNAMAX LLC • www.signamax.eu
Power class-mode
The command is used for configuring hierarchical mode of PD equipment
in POE port.
power class-mode {never | standard}
Syntax Description
never
Non-hierarchical mode, all PD equipments are taken as
CLASS0 level.
standard
The standard hierarchical mode which is ruled by 802.3AF.
【
【 【
【
Default Status
】
】 】
】
Use standard hierarchical mode
power detect-mode
The command is used to configure PD detecting mode of POE port.
power detect-mode {compatible | standard}
Grammar Description
compatible
Compatible detecting mode, it detects standard PD which is
ruled by 802.3AF and earlier non-standard PD equipment.
standare
Standard detecting mode, it can only detects standard PD
equipment which is ruled by 802.3AF.
【 【 【 【
Default Status
】 】 】 】
Use the compatible detecting mode
power disconnect
The command is used for configuring circuit broken detecting mode
of POE port.
power disconnect {ac | dc}
Syntax Description
ac
Alternating current broken detecting mode
Standare
Direct current broken detecting mode
【
【 【
【
Default Status
】
】 】
】
Use the alternating current broken detecting
mode
power priority
The command is used for configuring power supply priority of POE
port. When the general electric power is short, the high priority port
is chosen to supply power first. It is effect only under the
management mode with configured dynamic priority or static priority.
power priority {critical | high | medium | low}
Syntax Description
critical
the highest priority of critical
high
high priority
medium
middle priority
low
low priority
【
Default Status
】
Low priority