SignaMax 065-7434 Page 462 Configuration Manual Download

Page: 462 / 669

SIGNAMAX LLC • www.signamax.eu

Description and analysis:
For the command

show time-range

with the specified name of time

domain, only the time domain configuration specified in the command

is displayed.

show action-group

switch#show action-group

Displayed result:

action-group act1

remark l2-priority lp 5

remark l3-priority dscp 10

count red-yellow

meter mt1 (inactive meter)

mirror port 0/5

action-group act2

remark l2-priority dot1p ip-precedence

meter mt2 (active meter)

redirect port 0/9

Description and analysis:
action-group act1: the name of the action group is act1.

remark l2-priority lp 5: remark L2 priority and the internal priority is

remarked as 5.

remark l3-priority dscp 10: remark L3 priority and the value of DSCP is

remarked as 5.

count red-yellow: count the red and yellow packets colored by the

meter.

meter mt1 (inactive meter): the meter name associated to the action

group; inactive meter means the meter configuration does not exist.

mirror port 0/5: mirror to port 0/5.

action-group act2: same as the above.

remark l2-priority dot1p ip-precedence: the priority of Ethernet frame

is remarked according to the priority in the IP packet.

meter mt2 (active meter): the meter name associated to the action

Summary of Contents for 065-7434






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands

SignaMax 065-7434, Configuration Manual

Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands