SignaMax 065-7434 Page 580 Configuration Manual Download

Page: 580 / 669

212

SIGNAMAX LLC • www.signamax.eu

To delete the configuration, use

no svlan

svlan-id

vid

{qinq-type{double|mapping}|_cr_}

no svlan

Syntax

Description

vid

To configure SVLAN ID, which ranges from 1to 4094.

double

To configure QINQ type as double; the type allows
configuring multiple CEVLAN.

mapping

To configure QINQ type as mapping; the type only allows
configuring one CEVLAN

【

Default status

】

Undefined

Note

When EVC is bound to the local port, svlan information cannot be

configured;

When QINQ mode is one, svlan information cannot be configured.

cevlan-id

The command is used to configure CEVLAN ID.

cevlan-id

vid

no cevlan-id

vid

Syntax

Description

vid

To configure CEVLAN ID, which ranges from 1 to 4094

【

Default status

】

Undefined

Notes

When EVC is bound to the local port, cevlan information cannot be

configured;

When QINQ mode is one, cevlan information cannot be configured.

3. When QINQ type is mapping, only one cevlan can be configured.

qinq-mode

The command is used to configure QINQ mode.

qinq-mode {one|multiple}

Syntax

Description

one

To configure QINQ mode as one, in which the
SVLAN and CEVLAN information cannot be

Summary of Contents for 065-7434






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands

SignaMax 065-7434, Configuration Manual

Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands