SignaMax 065-7434, Configuration Manual, Page: 204 / 669

204 SIGNAMAX LLC • www.signamax.eu
timer expiry
ip igmp snooping [vlan
vlan-id
] querier
version
version
no ip igmp snooping [vlan vlan-id ] querier
version
To configure the querier version config
ip igmp snooping vlan
vlan-id
mrouter {port
port-id | link-aggregation la-id }
no ip igmp snooping vlan
vlan-id
mrouter
{port
port-id |
link-aggregation
la-id
}
To configure the router ports
statically
config
ip igmp snooping vlan vlan-id immediate-leave
no ip igmp snooping vlan vlan-id immediate-
leave
To configure whether to support
immediate leave
config
ip igmp snooping report-suppression
no ip igmp snooping report-suppression
To configure whether to support
report suppression
config
ip igmp snooping tcn flood query count
count
no ip igmp snooping tcn flood query
count
To configure the times of
general queries after TCN event
config
ip igmp snooping tcn query solicit
no ip igmp snooping tcn query solicit
To configure whether the non
spanning tree roots send global IGMP
leave packets actively to speed up the
recovery from TCN
config
ip igmp snooping version version
no ip igmp snooping version
To configure global IGMP version config
ip igmp snooping [vlan vlan-id] timer router-port
expiry timeout
no ip igmp snooping [vlan vlan-id] timer router-
port expiry
To configure the aging time of
dynamic uplink port
config
ip igmp snooping [vlan vlan-id] timer report-port
expiry timeout
no ip igmp snooping [vlan vlan-id] timer report-
port expiry
To configure the aging time of
dynamic report port
config
Command Description Configuration Mode
ip igmp profile profile-number
no ip igmp profile profile-number
To create/delete the port filtering rule config
permit | deny To configure the filtering processing
action of the filtering rule
config-igmp-profile
range addr1 {_CR_ | addr2}
no range addr1 {_CR_ | addr2}
To add/delete the filtered address
range
config-igmp-profile
ip igmp filter profile-number
no ip igmp filter
To apply the filtering rule on
(aggregation) port
config-port-x/x
config-link-aggregation-x
ip igmp max-groups
number
no ip igmp max-groups
To configure the maximum number
of multicast groups to which the port
can be added dynamically; the default
value is 500.
config-port-x/x
config-link-aggregation-x
ip igmp max-groups action {deny | replace}
no ip igmp max-groups action
To configure the processing after the
number of multicast groups to which
the port is added reaches the
maximum value; the default value is
deny.
config-port-x/x
config-link-aggregation-x
ip igmp snooping tcn flood
no ip igmp snooping tcn flood
To configure whether the multicast
packets flood during TCN
config-port-x/x
config-link-aggregation-x