SignaMax 065-7434, Configuration Manual

Page: 295 / 669

295 SIGNAMAX LLC • www.signamax.eu
other devices on all paths to the analyzing devices are configured with the vlan, and the
related ports are added to the vlan.
It has the following features:
In order to avoid the monitored data not being disturbed by other data traffic, RSPAN VLAN
can only bear the RSPAN traffic.
Besides the ports used for bearing RSPAN traffic, do not configure any other ports into the
RSPAN VLAN.
Basic Commands
Command Description Config mode
no monitor session
{
session_number |
all
|
local
|
remote
}
To clear the configuration of the SPAN
Session config
monitor session
session_number
source
{
port
port-id |[
,
|
-
][
both
|
rx
|
tx
]}|{
remote vlan
vlan-id}
To specify
SPAN Session
and source port;
associate the
RSPAN Destination
Session
with the RSPAN vlan
config
monitor session
session_number
destination
{
port
port-id |
link-aggregation
linkNum}|{
remote vlan
vlan-id }
To specify the destination port of the SPAN
Session; associate
RSPAN Destination
Session
with RSPAN vlan
config
remote-span
To configure the vlan as the RSPAN VLAN VLAN mode
The symbol “*” before the command description means that there is the configuration
example to describe the command in details later.
no monitor session
The command is to clear the configuration of the SPAN Session.
no monitor session {session_number | all |local | remote}
Syntax Description
session_number To clear the SPAN Session according to the Session number
all To clear all configurations of the SPAN Session
local To clear local configuration of the SPAN Session
remote To clear remote configuration of the RSPAN Session
After the SPAN Session is configured, users can clear the previous configured parameters via
the command no monitor session.