SignaMax 065-7434, Configuration Manual

Page: 496 / 669

128 SIGNAMAX LLC • www.signamax.eu
timeout
To configure the timeout for waiting the response from
the Tacacs server
【 【 【 【
Default status
】 】 】 】
5s
【 【 【 【
Command mode
】 】 】 】
Global configuration mode
aaa group server
This command is used to configure a server group. The no form of the
command is used to delete a server group.
aaa group server { tacacs | radius }
grp-name
no aaa group server { tacacs | radius } grp-name
Syntax Description
grp-name The name of a server group.
【 【 【 【
Default status
】 】 】 】
No
【
【 【
【
Command mode
】
】 】
】
Global configuration mode
Currently, TACACS and RADIUS servers can be configured.
Note
When configuring the name of a server group, the group name should
have specific meaning and avoid using the key word that may cause
confusion. For example, tac, rad, and loc may be confused with tacacs,
radius, and local when configuring the method list.
server (TACACS)
This command is used to configure the members of a TACACS server
group. The no form of the command is used to delete the members.
server
ip-address
no server ip-address
Syntax Description
ip-address
The address of the Tacacs server. It must be the address
configured through the command
tacacs-server
.
Otherwise, it cannot take effect.
【
Default status
】
No
【
Command mode
】
Server group configuration mode
server (RADIUS)
This command is used to configure the members of a RADIUS group. The
no form of the command is used to delete the members.
server ip-address [ auth-port port ] [ acct-port port ]
no server
ip-address
[auth-port
port
] [acct-port
port
]
Syntax Description
ip-address The address of the Radius server. It must be the address
configured through the command
radius-server
.
Otherwise, it cannot take effect.
auth-port The authentication port of Radius server
acct-port Accounting port of the Radius server
【
Default status
】
No
【
Command mode
】
Server group configuration mode
server-private (TACACS)