SignaMax 065-7434 Page 172 Configuration Manual Download

Page: 172 / 669

172

SIGNAMAX LLC • www.signamax.eu

Configure Vlan dot1q tunnel

This chapter mainly describes the Vlan dot1q tunnel function that Maip series switches

support and how to configure the function.

The contents are as follows:

Introduction to Vlan dot1q tunnel (mapping)

Application examples

Debugging and monitoring

Overview

Vlan dot1q tunnel is the expansion based on 802.1Q protocol. It is realized through

adding a layer of 802.1Q Tag (VLAN Tag) on the original 802.1Q packet header. Via

double-layer Tag, the number of VLANs is increased to 4K×4K. QinQ encapsulates the

VLAN Tag of the customers’ private network in the VLAN tag of the service provider

network.

In this way, packets go through the backbone network (public network) of carriers with

two layers of VLAN tags. In the public network, packets are transmitted only according to

the VLAN tag of the external layer (that is, the VLAN tag of the public network), and the

VLAN tag of the customers’ private network is screened. Therefore, VLAN IDs of the public

network are saved, and a simple L2 VPN tunnel is provided for users.

Vlan dot1q tunnel mapping is also the expansion based on the 802.1Q. The difference

between Vlan dot1q tunnel mapping and Vlan dot1q tunnel is: Vlan dot1q tunnel mapping

is not to encapsulate a layer of 802.1Q Tag in the original 802.1Q of the packet, but to

replace the original 802.1Q Tag of the packet with the new items of the 802.1Q table; and

the packet still has only one layer of 802.1Q table items.

Summary of Contents for 065-7434






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands

SignaMax 065-7434, Configuration Manual

Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands