SignaMax 065-7434, Configuration Manual, Page: 116 / 669

116 SIGNAMAX LLC • www.signamax.eu
port mode {access | trunk | hybrid}
This command is used to configure the port type.
Syntax Description
access
The port type is Access.
trunk
The port type is Trunk.
hybrid
The port type is Hybrid.
Default status: The default type of the port is Access.
Note
The port type cannot switch from Hybrid to Trunk directly. It should first switch to Access and
then to Trunk.
The port type cannot switch from Trunk to Hybrid directly. It should first switch to Access and
then to Hybrid.
After the port type is switched, the original VLAN configuration of the port is deleted and VLAN
configuration of the port recovers to the default value of the new port type.
port access vlan
This command is used to add Access port to VLAN. The no format of the command is used to
add the port to the default VLAN 1.
port access vlan vlanId
no port access vlan
Syntax Description
vlanId
The value range of VLAN ID is 1-4094.
Default status: By default, the port is added to VLAN 1.
Note
The configuration command must be consistent with the port type. Otherwise, the system
prompts error information, such as “port 0/1 current mode is not access”.
When the Access port is added to VLAN and if the VLAN does not exist, the VLAN is created
automatically.
Note