SignaMax 065-7434, Configuration Manual

Page: 480 / 669

112 SIGNAMAX LLC • www.signamax.eu
This command is to configure the discarding mode on a port; the no
format of the command can be used to cancel the configuration.
Syntax Description
tail-drop To configure as the tail-drop mode; by
default, the port is in the tail-drop mode
sred red droprate yellow droprate To configure as the sred mode. The value
range of the Droprate is 0-7.
Application Example
To configure the port0/1 as the sred mode: the discarding probability
values of the red packet and the yellow packet are 3, 4 respectively:
Command Description
Switch(config)#port 0/1 To enter the port mode
Switch(config-port-0/1)#drop-mode sred red 3
yellow 4
To configure the discarding mode
Switch(config-port-0/1)#exit To exit the port mode
Monitoring & Debugging
Commands for Monitoring
Command Description
show drop-mode [port portlist] To display the configured discarding mode of
a specified port list; if no port is specified then
display the configurations of all ports.
Example of Monitoring
To display the configuration of port0/1:
Command:
show drop-mode port 0/1
Display results:
port 0/1
drop mode: sred
red drop rate: 3
yellow drop rate: 4