SignaMax 065-7434 Page 119 Configuration Manual Download

Page: 119 / 669

119

SIGNAMAX LLC • www.signamax.eu

Syntax

Description

vlanId

The value range of VLAN ID is 1-4094.

Default status: The default VLAN (pvid) of the port is 1.

Note

The configuration mode must be consistent with the port type. Otherwise, the system prompts

error information, such as port 0/1 current mode is not hybrid.

vlan dot1q tag pvid

This command is used to configure the default VLAN packets of the Trunk port to be sent with

Tag. The no format of the command is used to delete the port configuration and recover the

default configuration, that is, the default VLAN packets of Trunk port are sent without Tag.

vlan dot1q tag pvid

no vlan dot1q tag pvid

Default status: The port does not have vlan dot1q tag pvid configuration.

Note

The configuration command must be consistent with the port type. Otherwise, the system

prompts error information, such as port 0/1 current mode is not trunk.

mac-vlan mac-address

This command is used to configure MAC VLAN items globally and distribute the corresponding

VLAN ID as per the MAC address. The no format of the command is used to delete the MAC

VLAN items.

mac-vlan mac-address

mac-address

vlan

vlanId

no mac-vlan mac-address

mac-address

vlan

Syntax

Description

mac-address

MAC address

vlanId

To distribute corresponding VLAN ID as per the MAC address; the
value range of VLAN ID is 1-4094.

Default status: By default, there are no MAC VLAN items.

Note

MAC address cannot be broadcast address or multicast address. If the illegal MAC address is

input, the system prompts error information.

Summary of Contents for 065-7434






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands

SignaMax 065-7434, Configuration Manual

Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands