SignaMax 065-7434, Configuration Manual

Page: 440 / 669

72 SIGNAMAX LLC • www.signamax.eu
hh:mm
Hour and minute
day
Date
month
Month
year
Year
[Configuration mode] Configuration mode of time range
[Default status] By default, no time ranges and time periods are
configured.
The no format of the command is to delete an absolute time range. It
can be the serial number of a time range and also can include the
contents of the time range.
no sequence
no [ sequence ] absolute start hh:mm [ day [ month [ year ] ] ]
end hh:mm [ day [ month [ year ] ] ]
Example:
Command Description
router(config-time-range)# absolute start 00:00 1
october end 23:59 3 october Three days for National Day every
year, from 0:00 October 1 to 23:59
October 3
show time-range
The command is to display the configuration and status of a time range.
show time-range [ time-range-name ]
Command Description
show time-range To display the configuration and
status of a time range
time-range-name
The name of a time range. If it is
not specified, all the time ranges
are displayed.
[Configuration mode] Privilege mode
Time Range Application
The time range has two states, including ACTIVE and INACTIVE. The
status of time range depends on the current status of the time periods
in the time range. If one time period is in the ACTIVE state, the time
range is in the ACTIVE state.
•
Bind with ACL rules
The time range is often bound with ACL rules, that is, whether the rule
takes effect depends on the status of the time range. Match the rule
only when the time range is in the ACTIVE state. When the time range
is in the INACTIVE state, ignore the rule during matching and enter the