SignaMax 065-7434, Configuration Manual, Page: 279 / 669

279 SIGNAMAX LLC • www.signamax.eu
isolate-port
The command ensures that the ports in same VLAN cannot communicate with each other. The
no syntax of the command can be used to resume communication among the ports.
isolate-port { port portlist | link-aggregation trunkId }
no isolate-port { port portlist | link-aggregation trunkid | CR }
Syntax Description
port portlist To configure isolated port as a normal port
link-aggregation trunkid To configure isolated port as an aggregation port
CR To cancel all isolated ports
【
Default status
】
not defined
When configuring an isolated port as a normal port (which means a port), users should ensure
that the port is not added into an aggregation group, or the isolation operation is failed.
If the port is added into an aggregation group, users need to isolate the aggregation group to
isolate the port instead of just isolating a port in the aggregation group.
When the configured isolated port is an aggregation port, users need to ensure that the
specified aggregation group exists and there is a port in the aggregation group, otherwise the
configuration is failed.