SignaMax 065-7434, Configuration Manual

Page: 67 / 669

67 SIGNAMAX LLC • www.signamax.eu
If configured:
aaa authentication enable default tacacs
，
use the tacacs authentication. If
there is a user name when logging in, then users can use the user name and input the enable
password of the user name to log in; otherwise users need to input a username and the
enable password of it. If the input user name exists on the tacacs sever, and the enable
password of tacacs is configured (notice: the corresponding enable password needs to be set
for users on the tacacs sever), then the authentication is passed, or is failed.
The above enable authentication methods can be combined to use, please refer to chapter 15
<Configure AAA >.
Modify Command Level
Every shell command of Signamax switch IOS has its default level. However the command
privileged can be used to modify the default level.
Users can only execute the commands whose levels are equal with or lower than the levels of
themselves. For example, if a user whose user level is 12, he can only execute the commands
of level 0-level 12.
The commands for modifying command level are as follows:
Command Description Config mode
privilege
MODE [level {0-15} [all | command LINE]]
To modify the command level config
no privilege MODE [level {0-15} [all | command LINE]}
To cancel the configuration of the command
level config