SignaMax 065-7434, Configuration Manual

Page: 581 / 669

213 SIGNAMAX LLC • www.signamax.eu
configured.
multiple To configure QINQ mode as multiple, in which
SVLAN and CEVLAN information can be
normally configured
【
【 【
【
Default status
】
】 】
】
multiple
Note
When EVC is bound to the local port, the qing mode cannot be configured.
type
The command is used to configure EVC type, including point-to-point
mode or multi-point to multi-point mode.
{point-to-point| multi-to-multi {uni-number uni-number
|_cr_}}
Syntax Description
point-to-point
To configure EVC type as point-to-point mode, and the
number of UNIs is two
multi-to-multi
To configure EVC type as multi-point to multi-point, and by
default, the number of UNIs is two
uni-number
When EVC type is configured as multi-point, the command
can be used to configure the number of UNIs of the EVC,
which ranges from 3 to 8000.
【
【 【
【
Default status
】
】 】
】
The default value is point-to-point mode.
local
This command is used to configure MEPID information of the local port,
which is added to the corresponding EVC through binding EVC to the port
by QINQ. To delete MEPID information of local port, add no before the
command. The MEPID information of local aggregation port can also be
configured.
local port port-number local-mepid mep-id
no local port port-number local-mepid mep-id
local link-aggregation link-number local-mepid mep-id
no local link-aggregation link-number local-mepid mep-id
Syntax Description
port-number
The ID of the local port, such as 0/1; only a single port can
be input
mep-id
MEP ID, which range from 1 to 8191
link-number
The number of the aggregation port group; currently, 16
convergence port groups are supported, that is, range from
1 to 16.