SignaMax 065-7434, Configuration Manual, Page: 66 / 669

66 SIGNAMAX LLC • www.signamax.eu
- If is a telnet user, the authentication is failed. “% No password set” is
prompted if aaa is not configured; “% Error in authentication” is
prompted if aaa is configured;
- If is a console interface user and the aaa is configured, then the
enable login tries to use the enable password to authenticate at first.
If there is no enable password, it uses none authentication means,
which means that the authentication is passed by default. If the aaa is
not configure, then “% No password set” is prompted and the
authentication is failed.
5. If the enable authentication is passed, then the user enters the specified user
level and the user possesses the corresponding level. Via the command show
privilege the user level can be viewed.
6. If configured aaa authentication enable default method and use the
corresponding method list to process the enable authentication, then the
corresponding methods need to be used for authenticating, they are as follows:
- If configured: aaa authentication enable default none ; no
password is needed
- If configured: aaa authentication enable default line ; if configured
line password then use the password, or “% Error in authentication” is
prompted and the authentication is failed.
- If configured: aaa authentication enable default radius , use the
radius authentication. Notice, the user name of radius enable
authentication is fixed, that is $enab+level$. Level is a number of 1-
15, that is the level the user is going to enter. Because radius uses the
user name of the fixed rule, users do not need to input the user name
when authenticating, just input the password to pass. If the password
of the user name with corresponding level is configured on the radius
sever, then input the corresponding password to log in successfully, or
the authentication is failed. For example, execute the command
enable 10, then use the fixed user name $enab10$; if the user name
exists on the radius sever, then input the user name and
corresponding password to pass the authentication.