SignaMax 065-7434, Configuration Manual

Page: 72 / 669

72 SIGNAMAX LLC • www.signamax.eu
automatically after a user logged in successfully
switch(config-line)# autocommand-option delay 5 nohangup To configure to execute the command automatically
after 5 seconds delayed and the connection is not
disconnected.
switch(config-line)# password 0 vty To configure the password of line as vty
switch(config-line)#exit To exit the line configuration mode
After configured according to above commands, users should be authorized the following line
attributes after telnet logged into the device:
Debug information is as follows: (via enable the command debug author exec ):
AUTHOR/EXEC/LINE (6): processing AV priv-lvl=14
AUTHOR/EXEC/LINE (6): processing AV autocmd=show mem
AUTHOR/EXEC/LINE (6): processing AV nohangup=TRUE
AUTHOR/EXEC/LINE (6): processing AV timeout=120
View Present User Level
The level of the present user can be viewed via a command:
The command is as follows:
show privilege
Execute in the normal user mode (STD) or the privileged user mode (EN).
Note: by default, the level of the command is 1. So the user whose level is 0 cannot execute
the command.
For example:
switch# show privilege
Current privilege level is 15
System Tools
Command show
The types of the information can be viewed via the system command show are as follows:
•
information about the system software and hardware resources