SignaMax 065-7434, Configuration Manual, Page: 534 / 669

166 SIGNAMAX LLC • www.signamax.eu
traceroute ethernet domain domain-name service-instance service-
name
{mpid
mpid
|
mac-address
}
This command is used to specify the destination MEP or MIP in the
maintenance domain and service instance to perform the link tracking
check.
The command does not have the no format.
traceroute ethernet domain
domain-name
service-instance
service-
name {mpid mpid | mac-address }
Syntax Description
domain
domain-name
To specify the maintenance domain name
service-instance
service-name To specify the service instance name
mpid id
To set the destination MEP ID
mac-address
To specify the destination MAC address
【
Default Status
】
No
clear ethernet cfm maintenance-points remote [domain domain-
name [service-instance service-name ] ]
This command is used to clear the CCM database.
The command does not have the no format.
clear ethernet cfm maintenance-points remote [domain domain-
name
[service-instance
service-name
]]
Syntax Description
domain
domain-name
To specify the maintenance domain name
service-instance
service-name
To specify the service instance name
【
Default Status
】
No
snmp-server enable traps ethernet cfm
This command is used to enable TRAP sending switch of CFM module
The command has no format.
snmp-server enable traps ethernet cfm [fault]
Syntax Description
Fault Open the sending of CFM fault warning TRAP
【 【 【 【
Default Status
】 】 】 】
No