SignaMax 065-7434, Configuration Manual

Page: 658 / 669

290 SIGNAMAX LLC • www.signamax.eu
restarting the device, you can continue to distribute.
If you only delete some items after the switching chip hardware
resources are used up, enabling IP Source Guard function of the other
ports cannot succeed, because you need to pre-distribute resources for
enabling the IP Source Guard function of the port. However, when the
switching chip hardware resources are not enough seriously, to make the
resource usage reaches the maximum value, the binding items occupy
the pre-distributed resources. Meanwhile, after the IP Source Guard
function is disabled on the port, the pre-distributed resources of the port
are released, but maybe the resources cannot be used for writing into
the binding table.
（
（ （
（
no
）
） ）
）
ip source binding
mac-addr
vlan
num ip-addr
Syntax Description
mac-addr
MAC address
num
VLAN ID
ip-addr
IP address
【
【 【
【
Default status
】
】 】
】
No
Application Examples
A p p l i c a t i o n i n N o n - D H C P E n v i r o n m e nt