SignaMax 065-7434 Page 321 Configuration Manual Download

Page: 321 / 669

321

SIGNAMAX LLC • www.signamax.eu

ip tcp round-trip

{

round-trip

}

no ip tcp round-trip
default ip tcp round-trip

Syntax

Description

round-trip

TCP max round-trip time, and the value range is

1-100s.

【

Default status

】

The default value is 3s.

The no command and default command are used to recover the default value of TCP max

round-trip time.

Configure Idle Time

ip tcp idle-timeout

{

idle-time

}

no ip tcp idle-timeout
default ip tcp idle-timeout

Syntax

Description

idle-time

TCP idle time, and the value range is 3-144000s.

【

Default status

】

The default value is 14400s (2 hours).

The no command and default command are used to recover the default value of the idle time.

Configure Timer Value

ip tcp init-timeout

{

init-time

}

no ip tcp init-timeout
default ip tcp init-timeout

Syntax

Description

init-timeout

TCP setting connection timer, and the value range is 2-30000.

【

Default status

】

The default value is 150 and the unit is 0.5s.

The no command and default command are used to recover the default value of the timer.

Configure max keepalive testing times

ip tcp keep-count

{

keep-count

}

no ip tcp keep-count
default ip tcp keep-count

Syntax

Description

keep-count

TCP keepalive times, and the value range is

3-20.

【

Default status

】

The default value is 8.

The no command and default command are used to recover the default value of TCP keepalive

times.

Summary of Contents for 065-7434






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands

SignaMax 065-7434, Configuration Manual

Search results

Summary of Contents for 065-7434

Reviews:

Related manuals for 065-7434

Brands by name

Popular brands