SignaMax 065-7434, Configuration Manual

Page: 386 / 669

18 SIGNAMAX LLC • www.signamax.eu
advertise Notify the summary route
not-advertise Do not notify the summary route
【
Default status
】
Do not summarize.
Note
The area range command can take effect only on the area edge router.
C o n f i g u r e O S PF t o R e - d i s t r i b u t e Ou t e r Ro u t e
S u m m a r y
When re-distributing routes to OSPF from other protocols, each
route is notified separately in outer link status notification. Use the
summary-address command and you can summarize all re-
distributed routes covered by specified network address and mask to
one route and only the outer LSA after summarizing is notified. In
this way, the size of the OSPF link status database is reduced. To
summarize the outer routes, use the
summary-address command.
The command summarizes the AS External LSA and generates only
one summary ASE LSA for all LSAs in the segment. ASBR only
notifies the summary ASE LSA to the other switch.
summary-address
The summary-address command is used to summarize the OSPF
outer routes. To make the command become invalid, use the
no
summary-address
command.
summary-address
address mask [
tag
{ tag-value } |
not-
advertise
]
no summary-address
address mask
[ tag {
tag-value
}
|
not-
advertise ]
Syntax Description
address
Summarize addresses
mask
Summarize address masks
tag-value Set the tag
not-advertise Do not notify after summarizing
【
Default status
】
Do not summarize.
Note
The command takes effect only on ASBR and summarizes the outer
routes of OSPF re-distribution.