SignaMax 065-7434, Configuration Manual, Page: 319 / 669

319 SIGNAMAX LLC • www.signamax.eu
Basic Commands for Configuring TCP
Command Description Configuration Mode
ip tcp recvbuffers To set the TCP receive buffer config
ip tcp sendbuffers To set the send buffer config
ip tcp retransmits To set the times of TCP re-transmission config
ip tcp segment-size To configures the size of the maximum TCP segment config
ip tcp round-trip To configure the TCP round trip time config
ip tcp idle-timeout To configure the idle time of the connection that is
before the first testing of keeping alive
config
ip tcp init-timeout To set the timeout of TCP setting up connection config
ip tcp keep-count To set the maximum keeping alive times when the
opposite terminal has no response
config
ip tcp path-mtu-discovery To set the TCP path MTU discovery config
ip tcp timestamp To enable the TCP time stamp config
ip tcp selective-ack To enable the TCP selective retransmission config
show ip tcpstate *To display the TCP statistics information enable
Note
Note Note
Note
“*” before command means it has configuration example description.
Configure TCP Attributes
Signamax switches can be configured with the following TCP attributes.
Configure TCP recvbuffers size
ip tcp recvbuffers
ip tcp recvbuffers { buffer-size }
no ip tcp recvbuffers
default ip tcp recvbuffers
Syntax Description
buffer-size TCP input buffer size, and the value range is 1024-65536.
【
Default status
】
The default value is 8192.
The no command and default command are used to recover the default value of the receiving
buffer.