SignaMax 065-7434, Configuration Manual, Page: 443 / 669

75 SIGNAMAX LLC • www.signamax.eu
set time-range max-offset
The maximum time offset is the maximum offset between the
accumulation time of the counter and the system time. The default
value is 100s.
The command for configuring the maximum time offset is as follows:
set time-range max-offset max-offset-number
Command Description
max-offset-number
Once the offset is exceeded, re-judge the
status of the time ranges and count timelive
during the next refreshing; refresh the
accumulation time of the counter. The unit
is second and the default value is 100s.
[Configuration mode] Global configuration mode
[Default status] The default value is 100s.
set time-range { disable | enable }
The default status of the time range switch is enable. The binding
entity has the time restriction. If the switch is “disable”, the binding
relationship is deleted and the binding entity is not restricted on the
time. For the ACL rule, all “time-range name” sentences are neglected
and the rule always takes part in the packet matching; for the access
list, the binding relationship does not exist and the access list always
takes part in the packet matching.
The command for configuring the time range switch is as follows:
set time-range { disable | enable }
Command Description
disable Disable the binding relationship with the
time range
enable
Enable the binding relationship with the
time range. The default value is enable.
[Configuration mode] Global configuration mode
[Default status] The default value is enable.