SignaMax 065-7434, Configuration Manual

Page: 610 / 669

242 SIGNAMAX LLC • www.signamax.eu
Syntax Description
rpdelaylarm The bi-directional delay alarm threshold; the value range is
from 1 to 5000; the unit is milli-second.
【
Default Status
】
The default value of the parameter is 500ms.
avgjitter-alarm jitterlarm
This command is used to set Jitter alarm threshold of the sla service.
When the statistics result of Jitter exceeds the threshold, execute the
alarming operation. The Jitter is defined as the difference between two
consecutive bi-directional delays. It is used to describe the stability of the
connection. The unit is ms.
Syntax Description
jitterlarm The Jitter alarm threshold; the value range is from 1 to 5000;
the unit is ms.
【
Default Status
】
The default value of the parameter is 500ms.
avglost-alarm lostlarm
This command is used to set the alarm threshold of the packet loss rate
of the sla service. When packet loss rate exceeds the alarm threshold,
execute the alarming operation. The unit is percent.
Syntax Description
lostlarm The
alarm threshold of the packet loss rate; the value range
is from 1
to 100; the unit is percent.
【
Default Status
】
The default value of the parameter is 500%.