SignaMax 065-7434, Configuration Manual

Page: 291 / 669

291 SIGNAMAX LLC • www.signamax.eu
show ip interface list
clear access-list counters
This command is to clear the access list counter. When there is no name and no number, all
access list counters are cleared.
clear access-list counters
{
access-list-number | access-list-name
}
Syntax Description
access-list-number The access list number, it can be a number among 1 to 2000
access-list-name The name of the access list
debug ip packet access-list
This command is to monitor and maintain the firewall by viewing the filtering information of
the access list.
The record comprises the information of the packet, such as the source address, the
destination address, the protocol type, the port number and the receiving or sending interface.
Undebug can be used to cancel the view.
[ debug | undebug ] ip packet access-list
【
【 【
【
Default status
】
】 】
】
Disable, that is undebug.
Monitoring Examples
Display all access lists:
Command: show access-list
Result:
ip access-list standard 2
10 permit host 92.49.0.3
20 deny any
30 permit 92.48.0.0 0.0.255.255
Standard access table 2 defines three rules. It permits the packets from the host 92.49.0.3 on
the subnet 92.49.0.0 to pass; permits all packets from the subnet 92.48.0.0; denies the other
packets.