manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 95 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 95

Safety

Software Related Safety Information

0.0

04/2012

0.0

A.4-11

0.0

A.4

A.4

A.4

CAUTION

A.4

Modifications in medical images are not saved automatically in 
the same way as image comment. Additionally, in case of a user 
switch where the new user has no adequate access rights, mod-
ifications of the image text may also be lost!

A.4

Image modifications may be lost.

A.4

✧

Use 

Patient > Save...

 in order to save the image comment 

and 

Patient > Save as...

 to save the image with modifica-

tions as a new image.

A.4

CAUTION

A.4

Inconsistent patient data or image information for 

syngo

 appli-

cations like Osteo CT, Pulmo CT, Volume, Circulation, Dental CT, 
LungCARE CT or Calcium Scoring!

A.4

Wrong basis for diagnosis.

A.4

✧

Do not modify patient data (

Edit > Correct

 in the 

Browser

 

menu) after results have been calculated.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments