manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 111 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 111

Safety

Software Related Safety Information

0.0

04/2012

0.0

A.4-27

0.0

A.4

A.4

A.4

CAUTION

A.4

A recording error may make a medium unusable!

A.4

In multi-session mode, all data previously stored on that 
medium could be lost, too. If this happens, any archive flags 
set to this data in the database become invalid.

A.4

✧

Only delete the data that you have archived on a media 
from the local database after you have successfully final-
ized and verified the media.

A.4

CAUTION

A.4

Switching to multi session mode may destroy data previously 
recorded on this medium!

A.4

Previously stored data can no longer be read.

A.4

✧

Only delete the data that you have exported on a CD-R from 
the local database after you have completed the session.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments