manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 113 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 113

Safety

Software Related Safety Information

0.0

04/2012

0.0

A.4-29

0.0

A.4

A.4

A.4

CAUTION

A.4

User access may be prevented due to forgotten or unknown 
accounts or passwords, or wrong setup (for example, in case of 
an emergency)!

A.4

Inaccessible system.

A.4

✧

Do not forget to define a general user account for emer-
gency access and assign it to a group and a role both called 

Emergency Access

. Define a local user account for emer-

gency. The password for this account should never expire.

✧

Regardless as to whether you specify a password for the 
emergency account or not, users shall be prohibited from 
changing any passwords (especially for the emergency 
account). 

✧

The users shall contact you immediately in case of prob-
lems.

A.4

CAUTION

A.4

Misuse of data handling!

A.4

Failure in diagnosis

A.4

✧

Ensure that only a trained user gets remote access to the 
system.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments