manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 291 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 291

Operation

Accessories for Patient Positioning

0.0

04/2012

0.0

D.3-25

0.0

Body support

D.3

The body support is an underlay for the mat. There are different 
positions for the Velcro strap fixation on both sides of the body 
support.

D.3

Mat

D.3

The mat provides a comfortable and secure position of the baby 
on the patient table. It is equipped with flaps.

D.3

The flaps secure the body of the baby. For the positioning of 
large babies, use the Velcro straps for the fixation of the flaps.

D.3

Head support

D.3

The head support is used for a comfortable positioning of the 
head of the baby. Different cushions can be placed inside. For 
better immobilization, the head support has Velcro on both 
sides. Here, you can attach the Velcro straps.

D.3

Velcro straps for arm fixa-
tion

D.3

The Velcro straps for arm fixation secure the arms of the baby. 
Different fixation positions for the Velcro straps for arm fixation 
are along the body support on both sides.

D.3

Velcro straps for head and 
body fixation

D.3

The Velcro straps secure the head of the baby. For better immo-
bilization, you can attach the Velcro straps to both sides of the 
head support.

D.3

For the positioning of large babies, the Velcro straps are used for 
the fixation of the flaps.

D.3

Cushions

D.3

The cushions are supplied to position the head of the baby 
safely and comfortably. They have to be placed inside the head 
support.

D.3

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments