manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 181 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 181

System Description

Console

0.0

04/2012

0.0

B.5-17

0.0

UPS operating modes  

B.5

The uninterruptible power supply can be operated in different 
modes.

B.5

Normal mode 

B.5

During normal operation, the mode indicator illuminates and 
the load level indicators display the percentage of UPS load 
capacity being used by the protected equipment. The UPS mon-
itors and charges the batteries as needed and provides power 
protection to your equipment.

B.5

Battery mode 

B.5

When the UPS is operating during a power outage, the alarm 
beeps and the battery mode indicator illuminates. The protected 
equipment is now powered by the UPS. When power returns the 
UPS returns to normal operation while the battery recharges.

B.5

The length of time that the battery can provide backup power 
during a power failure depends on the charging level of the bat-
tery.

B.5

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments