Siemens SOMATOM Spirit Operator'S Manual Download Page 215

Page: 215 / 484

System Handling

Operation of the Patient Table

0.0

04/2012

0.0

C.2-13

0.0

C.2

CAUTION

C.2

Uncontrolled system movements and radiation!

C.2

Injury or radiation damage.

C.2

✧

Always observe the patient during system movements.

✧

Press

STOP

if a system movement is performed that has not

been initiated on a gantry operator panel, on the control
box or during a scan (esp. at autorange).

✧

Press

STOP

if a key sticks or a movement does not stop

immediately when the key is released.

✧

Press

STOP

if the patient table does not stop as expected.

✧

Press

STOP

if the patient table position displayed differs by

more than 10 mm from the actual position.

✧

Press

STOP

if the patient is not correctly positioned during

system movements.

✧

Press

STOP

if the patient table moves in the wrong direc-

tion.

✧

Press

STOP

if the HOLD key does not respond during a scan.

✧

Press

EMERGENCY OFF

if the system does not respond to

the

STOP

keys and there is danger.

✧

Shut down the system and notify the Siemens Customer
Service if system malfunctions are detected.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 215 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: