manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 158 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 158

0.0

0.0

Console Related Safety Advice

System Description

B.4-2

SOMATOM Spirit

0.0

Connections  

B.4

Navigator console

B.4

On the back side of the image control computer (Navigator), 
you will find the connections for the monitor, keyboard and 
mouse.

B.4

On the rear of the UPS, you will find the output power connec-
tions for the monitor, the ICS computer, and the IRS computer as 
well as the input power connector.

B.4

B.4

B.4

Electric shock hazard

B.4

✧

Do not remove cover (or back), refer servicing to qualified 
personnel.

B.4

CAUTION

B.4

Impermissible or faulty manipulations or changes of the hard-
ware or software can cause the system to malfunction!

B.4

Injury of the patient or damage to the equipment, or both.

B.4

✧

Do not open or remove the cladding of the equipment nor 
install third-party software.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments